This thesis assignment at C-level is focused on calculation models and prediction methods
whish can be used in the stage we call ”prospecting” of possible windmill locations. The
location is southeast of Halmstad at the Farm “Stjernarpsgods”. The rapport has two main
areas directed towards this task. The areas are a study of literature and a description of
methods used in the project. The “prospect” project description is aimed towards calculations
of the energy carried by the wind and transformed to electricity by windmills.
With a relatively simple algorithm of mean wind speed data from the MIUU - model, Cp and
rotor area from a turbine with 90 m diameter, the calculated production is 6 638 MWh. When
the same mean wind speed is used in the second type of calculation, Weibull distribution
(with a calculated A and the form value c set to 2) and the power curve for Vestas V90 taken
from WindPro, the production was 6 873 MWh. The third alternative uses collected data from
a local mast at a distance of 18km´s from the site. This data is normalized and used to
calculate with Weibull distribution the production to 7 443 MWh. Finally a reference
calculation is done using WindPro and the official SMHI wind data from Halmstad and
Ringhals. In this case the production was calculated to 5 725 MWh. The difference is a 30
procent increase from the lowest to the highest production value. Comparing calculations at
different heights shows that the difference in result is very small at a height of 50 meters, but
increase with increasing height.
The Pay-off time was calculated with 3 different energy prediction models. The result was
Pay-off times off 7, 5 – 9 – 11, 4 years, with the price of electricity at 0, 60 Sek/kWh.
The environmental consequence analysis which is presented in appendix 1 is mainly focused
on landscape impact, whish in this case means, that the windmills are clearly visibl...
