Accuracy and precision of a technique to assess residual limb volume with a measuring-tape

Nedanstående innehåll är skapat av Mimers Brunns besökare. Kommentera arbete

Transtibial stump volume can change dramatically postoperatively and jeopardise prosthetic fitting. Differences between individuals make it hard to give general recommendations of when to fit with a definitive prosthesis. Measuring the stump volume on every patient could solve this, but most methods for volume assessments are too complicated for clinical use.The aim of this study was to evaluate accuracy and intra- and interrater precision of a method to estimate stump volume from circumferential measurements. The method approximates the stump as a number of cut cones and the tip as a sphere segment.Accuracy was evaluated theoretically on six scanned stump models in CAPOD software and manually on six stump models. Precision was evaluated by comparing measurements made by four CPOs on eight stumps. Measuring devices were a wooden rule and a metal circumference rule. The errors were estimated with intraclass correlation coefficient (ICC), where 0,85 was considered acceptable, and a clinical criterion that a volume error of ±5% was acceptable (5% corresponds to one stocking).The method was accurate on all models in theory but accurate on only four models in reality. The ICC was 0,95-1,00 for intrarater precision but only 0,76 for interrater precision. Intra- and interrater precision was unsatisfying when using clinical criteria. Variations between estimated tip heights and circumferences were causing the errors.The method needs to be developed and is not suitable for stumps with narrow ends. Using a longer rule (about 30 cm) with a set square end to assess tip heights is r...