Black-Box Model Development of the JAS 39 Gripen Fuel Tank Pressurization System : Intended for a Model-Based Diagnosis System

Nedanstående innehåll är skapat av Mimers Brunns besökare. Kommentera arbete

The objective with this thesis is to build a Black-Box model of the tank pressurization system in JAS 39 Gripen. This model is intended to be used in an existing diagnosis system for the security control in the tank pressurization system. The tank pressurization system is a MIMO system. This makes the identification process more complicated when the best model is to be chosen. In this master's thesis the identification procedure for a MIMO system can be followed. Testing of the diagnosis system with the created Black-Box model shows that the model seems to be good enough. The diagnosis system takes the right decisions in the performed simulations. This shows that system identification might be a good alternative to physical modelling for a real-time model. The disadvantage with the Black-Box model is that it is less accurate in steady-state than the physical model used before is. The advantage is that it is faster than the physical model. The diagnosis system and the model developed in this thesis are not directly applicable on the real system today. The model has to be redesigned on the real system, this is also the case for the diagnosis system. The diagnosis system also has to be redesigned, so general flight cases, not only the security control can be supervised. However, experie...